MARINE GREASE (GR015)

LIQUID WRENCH® Marine Grease offers superior rust and corrosion protection from salt water, salt air and atmospheric chemicals. Special water-insoluble formula recommended for corrosive marine applications —trailer wheel bearings, water pumps, hinges, pins, winches, anchor chain reels. This is an Overbased Calcium Sulfonate grease, which is characterized by exceptional corrosion protection, high dropping point and mechanical stability. Due to its unique chemistry, this product provides superior protection against corrosion in harsh, corrosive environments. The very high load carrying ability, excellent resistance to water, oxidation and corrosion, and outstanding performance in a wide temperature range, make it a high performance premium grease. This grease exhibits excellent pumpability characteristics. This Marine Grease contains no heavy metals or other harmful or environmentally undesirable additives such as phosphorus, chlorine, zinc, phenols, antimony, barium or lead.

Categories: ,
FacebookTwitterWhatsappEmail

APPLICATIONS:

• Superior Rust & Corrosion Protection
• Special Water-Insoluble Formula
• For Trailer Wheel Bearings, water pumps,

hinges, pins, winches, anchor chain reels

TYPICAL PROPERTIES:

DIRECTIONS: Do not mix greases of different types. Thoroughly remove old grease before applying.

DANGER: Eye and skin irritant. Avoid contact with eyes and prolonged or repeated contact with skin. Wash hands after using product. May be harmful if swallowed.

FIRST AID: EYE AND SKIN IRRITANT: Avoid contact with eyes and prolonged or repeated contact with skin. Wash hands after using product. Flush thoroughly with water for 15 minutes while lifting eyelids and get prompt medical attention. INGESTION: DO NOT INDUCE VOMITING. Call Poison Control Center, Physician or Hospital Emergency Room immediately.

KEEP AWAY FROM CHILDREN AND ANIMALS

NOTICE: While this information is presented in good faith and believed to be accurate, Blumenthal Brands Integrated, LLC does not guarantee satisfactory results from reliance thereon. The data is offered solely for your information and Blumenthal Brands Integrated, LLC disclaims all liability for any loss or damage from its use. Thoroughly test any application according to the product directions and independently conclude satisfactory performance. Nothing contained herein is to be construed as a recommendation to use the product in violation of any patent.

distributed by Blumenthal Brands Integrated, LLC ● Indian Trail, NC 28079-5225, U.S.A. ● 1-877-464-4865 ● solvewithb.com

NLGl Grade: 2
NLGI Certification: GC-LB Soap Type: Calcium Sulfonate Texture: Smooth
Color: Red

Corrosion Protection, ASTM D 1743: Pass Fretting Wear, mg loss, ASTM D 4170: 2.3 Low Temperature Torque, -40°C, Nm, ASTM D 4693: 7.6

High Temperature Life, hrs, ASTM D 3527: 100
Leakage Tendencies, g, ASTM D 4290: 6 Base Oil Properties, ASTM D 445

Viscosity @ 40°C, cSt: 100 – 178 Viscosity @ 100°C, cSt: 11 – 16 V.I., Minimum: 90

Pour Point, °C (°F), ASTM D 97: -18 (0) Flash Point, COC, °C (°F), ASTM D 92: 224 (435)

Penetration, ASTM D 217, worked 60 Stokes: 265 – 295
Dropping Point, °F (°C), Min, ASTM D 2265: 554 (290)

Copper Strip Corrosion,
210°F, 3 hrs, ASTM D 4048: 1a

Oxidation Stability, ASTM D 942 (100 hr., psi loss): < 1
Oil Separation, %, ASTM D 1742: 0.2 Timken OK Loads, lb, ASTM D 2509: 65 Four Ball EP, Weld Point, kg, ASTM D 2596, kg: 500

Four Ball EP, LWI, ASTM D 2596: 65
Four Ball Wear (Scar, mm) ASTM D 2266: 0.39
Water Washout, @ 175°F, % , ASTM D 1264: 2.8
Typical Operating Temp., -40°F to 325 °F

Related products