APPLICATIONS: • Superior Rust & Corrosion Protection • Special Water-Insoluble Formula • For Trailer Wheel Bearings, water pumps, hinges, pins, winches, anchor chain reels TYPICAL PROPERTIES: NLGl Grade: 2 NLGI Certification: GC-LB Soap Type: Calcium Sulfonate Texture: Smooth Color: Red Corrosion Protection, ASTM D 1743: Pass Fretting Wear, mg loss, ASTM D 4170: 2.3 Low Temperature Torque, -40°C, Nm, ASTM D 4693: 7.6 High Temperature Life, hrs, ASTM D 3527: 100 Leakage Tendencies, g, ASTM D 4290: 6 Base Oil Properties, ASTM D 445 Viscosity @ 40°C, cSt: 100 – 178 Viscosity @ 100°C, cSt: 11 – 16 V.I., Minimum: 90 Pour Point, °C (°F), ASTM D 97: -18 (0) Flash Point, COC, °C (°F), ASTM D 92: 224 (435) Penetration, ASTM D 217, worked 60 Stokes: 265 – 295 Dropping Point, °F (°C), Min, ASTM D 2265: 554 (290) Copper Strip Corrosion, 210°F, 3 hrs, ASTM D 4048: 1a Oxidation Stability, ASTM D 942 (100 hr., psi loss): < 1 Oil Separation, %, ASTM D 1742: 0.2 Timken OK Loads, lb, ASTM D 2509: 65 Four Ball EP, Weld Point, kg, ASTM D 2596, kg: 500 Four Ball EP, LWI, ASTM D 2596: 65 Four Ball Wear (Scar, mm) ASTM D 2266: 0.39 Water Washout, @ 175°F, % , ASTM D 1264: 2.8 Typical Operating Temp., -40°F to 325 °F PRODUCT INFORMATION SHEET — UPDATED 11/19/2019 DIRECTIONS: Do not mix greases of different types. Thoroughly remove old grease before applying. DANGER: Eye and skin irritant. Avoid contact with eyes and prolonged or repeated contact with skin. Wash hands after using product. May be harmful if swallowed. FIRST AID: EYE AND SKIN IRRITANT: Avoid contact with eyes and prolonged or repeated contact with skin. Wash hands after using product. Flush thoroughly with water for 15 minutes while lifting eyelids and get prompt medical attention. INGESTION: DO NOT INDUCE VOMITING. Call Poison Control Center, Physician or Hospital Emergency Room immediately. KEEP AWAY FROM CHILDREN AND ANIMALS